Ooza gcode controls

Solenoid

This is something that pinches the air supply completely, like 'pen down' and 'pen up'

Configured with M950 P2 C"out7" Q65535
Open regulator? with M42 P2 S1 turns the green light on
Close regulator? with M42 P2 S0 turns the green light off

Pressure Regulator

This is what controls the output of the compressor

Configured with M950 F0 C"out9" Q500; M106 P0 C"regulator" H-1
No pressure with M106 S0
Half pressure with M106 S0.5