FDM / FFF 3D Printers
General info links on FDM/FFF 3D printing, and specific information on machines in basement.
Fused Deposition Modeling (FDM) is the most common term for this printing technology, but the term was/is copyright. Fused Filament Fabrication (FFF) was coined by the open-source RepRap (Wikipedia) community in 2005 to avoid legal issues.
If you're new to FFF printing, this is a decent general overview: https://all3dp.com/2/3d-printing-for-beginners-all-you-need-to-know-to-get-started/ (Full article, 3,000 words, broken into small section.)
Ultimaker S5 general info
The Basics (from manual) RC has two Ultimaker S5 FDM printers. S5s are dual extruder units, with ...
Ultimaker S5 - Zorro
RC has two Ultimaker S5 machines, this page is for Zorro specific info.
Ultimaker S5 - Luna
Needs flashing that requires partial (potentially dangerous) disassembly, or possibly new parts. ...
Qidi - Q1 Pro
Overview Use their slicer https://github.com/QIDITECH/QIDIStudio/releases Hostname is `mkspi` so ...